XLW(EC) Auto Tensile Tester

XLW (EC) Auto Tensile Tester can be used to measure tensile, peeling, deformation, tearing, heat sealing, adhesive, puncture force, opening force and low speed unwrapping force as well as other performance of plastic films, composite materials, soft package materials, plastic flexible tube, adhesives, adhesive tape, label stickers, medical plasters, release paper, protection films, combined caps, aluminium foil, diaphragm, back sheets, non-woven fabrics, rubber, paper, etc.

Benefits :
  • Tests can be quickly started
  • Compression force can be detected
  • Easy operation
  • Broad applications
  • More convenient and intelligent

  • Shearing Test
  • Test of Tensile Strength and Elongation Rate
  • Test of Tensile Strength at Break
  • Tear Resistance Test
  • Heatseal Strength Test
  • 90 Degree Peel Test
  • 180 Degree Peel Test
  • Tensile Strength Test at Defined Elongation
Professional Technology
  • Better than 0.5% of full scale effectively ensures accurate test results
  • Support bidirectional testing modes including stretching and compression and test speed could be adjusted freely
  • 8 independent test modes are available, including tensile strength, peeling force, tearing force, heat sealing and other performance test.
  • Different test range of load cells and 7 distinct test speeds to meet different test requirements
  • Pneumatic clamping system provides the even clamping force for specimen to ensure the accuracy of test results
  • Intelligent designs of over-travel protection, overload protect, and automatic position reset for safe test operation
  • Professional operating software support statistical analysis of group specimens, and export test results in different units
  • Support LystemTM Lab Data Sharing System for uniform and systematic management of test results and test reports

XLW (EC) utilizes Labthink's latest embedded computer system, with better performance than traditional single chip one.

  • Embedded computer control system integrates control software with the instruments together
  • Professional control system provides safer and more reliable data management as well as test operation
  • The instrument can be easily operated by a mouse, a keyboard, and a monitor, without requiring a PC.
  • The instrument is equipped with four USB ports and dual internet ports for convenient data transmission.

This instrument conforms to multiple standards including:
ISO 37, ASTM E4, ASTM D882, ASTM D1938, ASTM D3330, ASTM F88, ASTM F904, JIS P8113, GB 8808, GB/T 1040.1-2006, GB/T 1040.2-2006, GB/T 1040.3-2006, GB/T 1040.4-2006, GB/T 1040.5-2008, GB/T 4850-2002, GB/T 12914-2008, GB/T 17200, GB/T 16578.1-2008, GB/T 7122, GB/T 2790, GB/T 2791, GB/T 2792, GB/T 17590, QB/T 2358, QB/T 1130

Load Cell Capacity 500 N (standard) 50 N (optional)
Accuracy Better than 0.5% FS
Speed Forward 50, 100, 150, 200, 250, 300, 500 mm/min
Backward 50, 100, 150, 200, 250, 300, 500 mm/min
Stroke 950 mm
Number of Specimens 1
Pneumatic Clamp Available
Standards to Follow ISO 37, ASTM E4, ASTM D882, ASTM D1938, ASTM D3330, ASTM F88, ASTM F904, JIS P8113

© 2018 Packone Solutions LLP. All rights reserved. Designed and developed by Claps and Whistles.