Over the years, we have produced several useful documents for our clients here at Mica.
We are happy to share these with you. Please feel free to review by clicking on the links below.
Dispensing Mica Products from Totes
A quick guide on how to properly dispense Mica product from IBC totes
Mica Container Selection
Click above to find out which container option is ideal for your application needs.
Water based MICA primers are formulated to adhere to polymeric
Don't over-apply. Don't under-
Extrusion Coating Polypropylene
Many flexible plastics converters extrude low-density polyethylene ("LDPE") on a daily basis. This resin is easy to process and meets the customers' requirements for adhesion, cohesion, and chemical resistance. IN some
Out of Line Priming
Mica extrusion coating primers have been developed for single-pass processes. The best performance will always be achieved when the primer is applied immediately prior to extrusion coating.
Sometimes, however, there is a need to perform a multiple-pass process, where a substrate is primed, dried, rewound and stored for later use.
Treatment + Primer = SUCCESS!
Do we have to prime if we treat? Do we have to treat if we prime? The answer is YES to both
The function of a chemical primer is to enhance adhesion and contribute product resistance to a converted structure.
The Perils of Over-treatment
In our last issue of Primer Intelligence, we described the heroic effects of flame and corona discharge treatment. Now it is time to back-peddle a little and warn of the risks inherent in too much of a good thing.
The Art of Smooth Roll Application
Primer application is not limited to gravure systems. Many converters have found smooth roll applicators well suited to apply MICA water based primers.
Time in The Air Gap
Adequate oxidation of an extrusion coating resin in the air gap is critical for adhesion to the primer.
© 2020 Packone Solutions LLP. All rights reserved.