718 PH - Reel lifting expanding chucks with leaves

The Model 718/PH is recommended primary for lifting and vertical handling of reels.

It is superior for higher weights and grants a safe core gripping during lifting and transport operations. The chuck body and the expanders (lugs or leaves, depending from the application) are available in steel only. The chuck is available in flange, crane hook or shaft extension type mountings, always custom made. Expansion is accomplished by one or more springs that mechanically engage the expanders; chuck retraction is obtained pneumatically. The chuck can be stepped for use with different core sizes.

Standard sizes available for this Model are listed below.


  • Core diameter: from 70 to 300 mm
  • Chuck length: 400 mm
  • Expansion range: 12 mm on diameter
  • Air pressure: min. 5 bar (suggested 6 bar)

© 2024 Packone Solutions LLP. All rights reserved.